If you are interested in the sport of snowboarding but you can't afford to buy the latest and greatest board model then you may want to look for a discount snowboard offer that will make this sport affordable for you. One way to do this is to buy a used snowboard. There are a lot of people who like to upgrade their boards each season, or every other season, and they sell their boards after minimal use. Other people, like college student, may need money to go home during summer break or to pay their rent and they sell their boards to make money. No matter what the reason is, you can get a great deal on a board by looking for gently used boards.
The first thing that you will want to do when selecting a used board is to look for one that is still in pretty good shape. Make sure that its core is still stable and that it looks like it still has a lot of use left in it. Because the board is used, chances are that it won't be perfect, but don't worry, because there are ways to repair and restore a board.
After selecting your discount snowboard from a second hand store, from a garage sale, or from a classified ad, you next step is to survey it for damage. To get the clearest picture of what condition your board is in you will need to clean it. To do this you simply need to wipe down the board with a damp rag to remove dirt and rocks. Next set it on a flat surface and spread on a base cleaner and then wipe it off. This will clean off a lot of debris and dirt, and it will leave you with a clear view of what damage you will need to repair.
Your next step will be to fill any gouges that the base of the discount snowboard has. To do this you will need a P-Tex candle. Light the candle and allow time for the carbon to burn off of the wick. Then hold the candle over the gouge and tip it so that the wax can drip into the depression and fill it. Once filled allow the wax to cool and harden. Then take a scraper and remove any overfill wax, or wax drippings.
To repair edge damage you can use a snowboard tuning file and instructions provided by the manufacturer's of the board. Use your tuning file to straighten or angle the bevel on your board following the recommendations of the manufacturer. Generally older models will recommend a 0/0 edge, while newer model will recommend an angled bevel.
If the graphic is damaged on your board you may need to reapply a new logo or graphic design to the board. To do this you will need to use your imagination, your artistic talents, and products that are designed for the conditions your board will be put through. You can talk to a snowboard dealer about what paints, logo packs, and varnishes are available for board graphics.
Author : Jamel
http://www.articleclick.com/Article/Discount-Snowboard-How-to-Care-For-and-Restore-a-Used-Board/949537
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment